|
|
Post by v8digou on Jan 6, 2013 1:20:08 GMT -4
Maybe parts for trucks or traction...i would think the ignition system would b tge same for a 454...minus the distibutor its self cause the decks r diffrent heights I do belive
|
|
|
|
Post by bradmac on Jan 6, 2013 16:44:31 GMT -4
Figured I'd post a few better pics in the day light. Attachments:
|
|
|
|
Post by bradmac on Jan 6, 2013 16:45:45 GMT -4
We're guna have to shim the rear up about an inch to completely level it out tho Attachments:
|
|
|
|
Post by Chevylover on Feb 3, 2013 20:54:12 GMT -4
How's the build coming ?
|
|
|
|
Post by bradmac on Feb 5, 2013 8:41:14 GMT -4
Well this winter weather kinda slowed us down considering we couldn't get it in the garage but we decided to pull the cab off an get the chassis on the hoist an make the build alot easier. That will be done Saturday. Then it will be build time!!! May is only 3 months away. Time get at er!!!!!!
|
|
|
|
Post by bradmac on Feb 13, 2013 22:52:50 GMT -4
FInally got the cab off an the chassis into the garage tight fit on the rad to the top of the door but she fit. An test fitted one of are tires on Attachments:
|
|
|
|
Post by bradmac on Feb 13, 2013 22:56:08 GMT -4
Tires fit nice. It's guna bring the truck up another 5 inches with the difference in tire size. Attachments:
|
|
|
|
Post by bradmac on Mar 14, 2013 15:09:50 GMT -4
Well we got are transfer case in a mount now we made up. Still got some welds to go over an put in a few gussets but its where it shud be lol. Hoping by Sunday the shafts will be in. Ps does anyone know how to down size pictures when up loading from an iPhone? Checked te site out on a pic the other day an all the pictures are hugeee Attachments:
|
|
|
|
Post by bradmac on Mar 14, 2013 15:11:15 GMT -4
Pc***
|
|
|
|
Post by shaun p on Mar 19, 2013 20:24:09 GMT -4
Can't wait to see it in action.
|
|
|
|
Post by bradmac on Mar 20, 2013 21:58:38 GMT -4
We got are rear axle turned around so the whole drive line will be straight fabed up some saddles an bolted it under the leafs. An transfer case is all in just have to put a support or two on it. Everything is lookin good. Attachments:
|
|
|
|
Post by bradmac on Mar 20, 2013 22:03:55 GMT -4
Weary have to make the rear shaft longer looking at the slip but the angle don't seem too bad Attachments:
|
|
|
|
Post by bradmac on Mar 20, 2013 22:07:55 GMT -4
We may***.
god dam touch screens...
|
|
|
|
Post by bradmac on Mar 23, 2013 16:57:13 GMT -4
starting to look like a truck now Attachments:
|
|
|
|
Post by bradmac on Mar 23, 2013 17:00:25 GMT -4
. Attachments:
|
|
