|
|
Post by Rue on Feb 24, 2008 19:07:19 GMT -4
A few pics of the finshed product.Got a few things to finsh up and have to move the rad. and bat.When I get the buggy all twisted up and turn the rear,the tires get into them >:(Anyhow the turning circle got smaller ;D45' to24' 8-)A different thing to drive to beable to swing the rear around.    A pic of Cory's BEAST ;D  Fancy tires and rims eh!!! Rue |
|
|
|
Post by damnjeep on Feb 24, 2008 21:19:56 GMT -4
Mighty fine work!
I will never be able to understand HOW you find the time to do these projects!
And don't worry what the boys on POR say. Crocs on a guy aren't gay.... um... right?
Ya big flamer..... ;D ;D
|
|
|
|
Post by 90bronco on Feb 25, 2008 12:14:33 GMT -4
that looks awsome ,nice fab work ! ;D
|
|
|
|
Post by rallyroach on Feb 25, 2008 20:56:44 GMT -4
Damn, that's some sweet work Rue! Don't forget to let us HRM boys know when yer going out for a test run in the spring, I'd love to tag along and see it in action  |
|
|
|
Post by Rue on Feb 25, 2008 22:04:10 GMT -4
I will never be able to understand HOW you find the time to do these projects! Alot of late nights ;D |
|
|
|
Post by Rue on Feb 25, 2008 22:06:38 GMT -4
Damn, that's some sweet work Rue! Don't forget to let us HRM boys know when yer going out for a test run in the spring, I'd love to tag along and see it in action Spring!!!I was think more like next weekend if the weather is good ;D Rue |
|
|
|
Post by jan on Feb 26, 2008 7:30:34 GMT -4
wow Rue! the rear axle looks amazing. huge gains in the turning radius.
how much stroke do you use on the ram?
i really like the hub mod too, with the dowels.
was it accurate enough to center punch the hub, or did you have to use an index table?
finally a machine project that fits on my "mill" lol
|
|
|
|
Post by Charles on Feb 26, 2008 9:04:21 GMT -4
Looks awsome Rue. Hope i get to see it wheelin.
|
|
|
|
Post by Rue on Feb 26, 2008 17:36:17 GMT -4
wow Rue! the rear axle looks amazing. huge gains in the turning radius. how much stroke do you use on the ram? i really like the hub mod too, with the dowels. was it accurate enough to center punch the hub, or did you have to use an index table? finally a machine project that fits on my "mill" lol The ram has 5 1/2"of stroke,And for drilling the holes for the dowels,I just bolted the drive flange on and drilled the holes in the drill press. Rue |
|
|
|
Post by johnvon on Feb 29, 2008 21:49:22 GMT -4
WOW! That's some fantastic fab & machining work. I'll be sure to make it down with Mike & Paul...must see this rig in action.
|
|
