|
|
Post by MudMagnet on Jun 14, 2010 20:27:51 GMT -4
|
|
|
|
Post by MudMagnet on Jun 16, 2010 20:19:23 GMT -4
|
|
|
|
Post by Charles on Jun 16, 2010 21:25:14 GMT -4
Lookin good. You should put some axles on the roof while your at it. Thats where it spends most of its time.  |
|
|
|
Post by MudMagnet on Jun 17, 2010 16:09:00 GMT -4
it use to, last season i only upset it once, and only once so far this season..... got my suspension set up good now and its quite stable because of it. but it use to be really bad, like every trip it was on its lid ;D
|
|
|
|
Post by Charles on Jun 18, 2010 20:21:09 GMT -4
... so is that the reason for the seat relocation? Are you shootin to lower the center of gravity that much more?... or is it a comfort thing. Buggy is lookin very good by the way. Came a long way from the first time I seen it. I like the idea of it being a standard now although its probably a bit more work on the rocks to keep it where you want.
I see your running a trac bar on the front axle. I need to put one on my truck big time. It bump steers really bad with the drag link angle it has and I think thats the cure.
|
|
|
|
Post by MudMagnet on Jun 20, 2010 17:22:02 GMT -4
mine is full hydro steering so it dosn't have bump steer ;D and yes the seat drop is to get the center of gravity down as much as i can. i'm also droping the battery down between the frame rails behind the passengers seat. i also have a RCI fuel cell to put in it now, the factory tank started leaking on me this season. also thinking about mounting the rear winch to the axle.
|
|
|
|
Post by Charles on Jun 27, 2010 23:20:12 GMT -4
very cool... Couldn't help but notice the thornbirds,... you sellin the Irocks??? ;D
|
|
|
|
Post by MudMagnet on Jun 28, 2010 16:16:57 GMT -4
nope, the 40" irocs are my rock tires, the 33" turdbirds are my pit tires. ;D
|
|
|
|
Post by MudMagnet on Jun 28, 2010 16:18:32 GMT -4
i started grooving the thornbirds too got one done then decided on cutting the cage apart ;D  |
|
|
|
Post by Charles on Jun 28, 2010 18:22:21 GMT -4
Lookin good!!! Keep the progress pics commin!
|
|
|
|
Post by MudMagnet on Jun 29, 2010 17:11:56 GMT -4
|
|
|
|
Post by MudMagnet on Jun 30, 2010 20:54:22 GMT -4
|
|
|
|
Post by MudMagnet on Jul 7, 2010 20:28:33 GMT -4
just a few progress pics to keep the page going ;D   blue smurf tittys  and the start of the dash  |
|
|
|
Post by Charles on Jul 7, 2010 23:21:06 GMT -4
Nice... I'm a huge fan of tits. ;D
What did you plumb your rad with?? I'm putting mine in the bed and can't make up my mind whether to plumb it with black iron or rubber tubing. I'm leaning more on the rubber tubing tho.
|
|
|
|
Post by MudMagnet on Jul 8, 2010 17:47:28 GMT -4
1" heater hose.... not cheap though, about 75$ for the amount to do mine....
i'd imagine you will need a much bigger tube too... some people use exhaust pipe then a piece of rubber hose on each end
|
|
