kevin
Mud Bunny
Posts: 56
|
Post by kevin on Dec 31, 2009 16:46:09 GMT -4
hey was justwondering how much work and how hard it is to put a body lift in ? it would be going into a 2000 dakota and i got a spot and tools just wondering what sorta prolbems can i run into thanks
|
|
|
|
Post by chevyboy on Dec 31, 2009 17:37:54 GMT -4
Well its not that bad of a job to do. As long as all the body Bolts come out good its not hard at all. You will have to do a little modifying to the 4x4 shifter if its on the floor of the truck. The streering should be fine as long as you don't go over a 3" Body lift. Just have to take your time at it and just watch around the motor for the ground wires from the body to the frame and maybe your brake lines.
|
|
|
|
Post by Carl on Dec 31, 2009 19:35:34 GMT -4
you will also need to extend your fuel tank fill spout.flexible rad hose works great you may need a few different size washers just in case the factory ones are bad especially in a 10 year old dodge or any 10 year old truck
|
|
